The separation filter element has good lipophilicity and hydrophobicity, thereby further separating water

Category： Industry Information

Time：2023-06-16

The polymer separator is mainly designed for liquid-liquid separation and includes two types of filter elements, namely, a polymer filter element and a separation filter element. For example, in an oil water removal system, the oil flows into a polymer separator and passes through a polymer filter element, which filters solid impurities and collects small water droplets into large water droplets.

The vast majority of the aggregated water droplets can be separated from the oil by their own weight and settle into the water collection tank. The oil then flows through the separation filter element, which has good oleophilic and hydrophobic properties, to further separate the water, and then the clean, water-free oil flows out of the polymeric separator. The oil first enters the lower part of the filter shell from the pipe, and then flows into the filter element from the outside to the inside. At this time, the thicker particles will immediately precipitate and be released by the drain valve, and the smaller particles will be intercepted by the filter element.

The coalescence separation filter element is used for oil-water separation system, mainly separating oil-water mixture, suspension solution, emulsion, etc. The use process of coalescence separation filter element in the system is divided:

Solid-liquid separation-demulsification-coalescence-separation-adsorption. In the system, the larger the number ratio of the coalescence filter element and the separation filter element, the better the coalescence effect and the faster the separation speed. At present, two kinds of water treatment filter elements have been standardized.

The coalescing filter element has the dual functions of filtering impurities and coalescing water from aviation kerosene, and is an important functional element of the fine filter.

It can meet the needs of various fine filters used in fixed mobile refueling facilities.

1. Multi-layer composite structure filter paper, high filtration accuracy;

2. After careful setting and special treatment of glass fiber layer, the coalescence effect is good;

3. The flow density is large, and the size of the fine filter is reduced;

4. Large pollution capacity and long service life;

5. The specifications and varieties are complete, which can meet the needs of various fine filters.

After the cleaned oil is collected by the filter element tray, the polymer separator flows out of the outlet pipe. As the amount of oil processed increases, the contaminants deposited on the filter element will cause an increase in the polymer pressure difference. When the differential pressure rises to 0.15mpa, it indicates that the polymer filter element is blocked and should be replaced.

The oil flows into the primary tray from the oil inlet of the polymer separator, and then is distributed to the inside of the primary filter element. After the process of filtration, demulsification, water molecule growth and polymerization, impurities are trapped in the primary filter element, the polymerized beads settle in the precipitation tank, and the oil enters the secondary filter element from the outside to the inside, and accumulates in the secondary tray. Outflow from the polymer separator outlet. The material of the secondary filter element is hydrophobic, the oil can pass smoothly, and the free water is blocked outside the filter element, flows into the sedimentation tank, and is discharged through the discharge valve.

Keywords： The separation filter element has good lipophilicity and hydrophobicity, thereby further separating water

RELATED INFORMATION

Company News

Industry Information

Technical Information

SAF Coolest v1.3 设置面板FDESX-ZUHS-BFZQE-ZVF

营业执照及SEO链接： Business License

无数据提示

Sorry, the current column has no content for the time being.!

You can view other columns or returnHome Page

SVG图标库请自行添加图标，用div包起来，并命名使用